Project: High temperature metrology for industrial applications (>1000 °C)

Temperature measurements above 1000 °C are difficult to make but necessary for many industries such as aerospace and steel production. As industries cannot accurately measure these high temperatures, they often run processes too hot and therefore operate inefficiently. By developing a range of measurement methods, accurate at high temperatures, this project will enable more efficient operation of industrial processes, reduced energy use and lower greenhouse gas emissions. The project will focus on both ‘in situ’ techniques, where measurement devices are located directly in the environment being measured, as well as non-contact techniques that can take measurements without directly exposing devices to the high temperatures involved.

Acronym IND01 HITEMS (Reference Number: IND01)
Duration 01/09/2011 - 31/08/2014
Project Topic Metrology
Project Results
(after finalisation)
See Website
Website visit project website
Network EMRP
Call EMRP Call 2010 - Industry and Environment

Project partner

Number Name Role Country
1 NPL Management Limited Coordinator United Kingdom
2 Centro Español de Metrología Partner Spain
3 Cesky Metrologicky Institut Partner Czech Republic
4 Conservatoire national des arts et metiers Partner France
5 Istituto Nazionale di Ricerca Metrologica Partner Italy
6 Laboratoire national de métrologie et d'essais Partner France
7 Physikalisch-Technische Bundesanstalt Partner Germany
8 Slovenský Metrologický Ústav Partner Slovakia
9 Turkiye Bilimsel ve Teknolojik Arastirma Kurumu Partner Türkiye
10 VSL B.V. Partner Netherlands
11 Commissariat à l'énergie atomique et aux énergies alternatives Observer France
12 Endress + Hauser Wetzer GmbH Co KG Observer Germany
13 GDF Suez Observer France
14 Meggitt (UK) Limited Observer United Kingdom
15 Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V. Germany